`OctoPrintClient.printer`

Note

All commands here that interact with the printer (anything that sends a command) will resolve the returned jQuery Promise when the request to the server enqueuing the command has been processed, not when the command was actually sent to or processed by the printer.

See the note here for an explanation why that is the case.

OctoPrintClient.printer.getFullState(flags, opts)

Retrieves the full printer state, including temperature information, sd state and general printer state.

The flags object can be used to specify the data to retrieve further via the following properties:

history: a boolean value to specify whether the temperature history should be included (true) or not (false), defaults to it not being included

limit: an integer value to specify how many history entries to include

exclude: a string value of comma-separated fields to exclude from the returned result.

See Retrieve the current printer state for more details.

Arguments

flags (object()) – Flags that further specify which data to retrieve, see above for details
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.getToolState(flags, opts)

Retrieves the current printer extruder state/temperature information, and optionally also the temperature history.

The flags object can be used to specify the data to retrieve further via the following properties:

history: a boolean value to specify whether the temperature history should be included (true) or not (false), defaults to it not being included

limit: an integer value to specify how many history entries to include

See Retrieve the current tool state for more details.

Arguments

flags (object()) – Flags that further specify which data to retrieve, see above for details
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setToolTargetTemperatures(targets, opts)

Sets the given temperatures on the printer’s extruders.

targets is expected to be an object mapping tool identifier to target temperature to set.

Example:

Set first hotend to 220°C and second to 205°C.

OctoPrint.printer.setToolTargetTemperatures({"tool0": 220, "tool1": 205});

See the target command in Issue a tool command for more details.

Arguments

targets (object()) – The targets to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setToolTemperatureOffsets(offsets, opts)

Sets the given temperature offsets for the printer’s extruders.

offsets is expected to be an object mapping tool identifier to offset to set.

Example:

Set the offset for the first hotend’s temperature to +10°C and the offset for the second hotend’s temperature to -5°C.

OctoPrint.printer.setToolTemperatureOffsets({"tool0": 10, "tool1": -5});

See the offset command in Issue a tool command for more details.

Arguments

offsets (object()) – The offsets to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.selectTool(tool, opts)

Selects the printer’s current extruder.

tool is the identifier of the extruder to select.

Example:

Select the second tool, extrude 5mm of filament, then select the first tool.

OctoPrint.printer.selectTool("tool1")
    .done(function(response) {
        OctoPrint.printer.extrude(5.0)
            .done(function(response) {
                OctoPrint.printer.selectTool("tool0");
            });
    });

See the select command in Issue a tool command for more details.

Arguments

tool (string()) – The tool identifier of the extruder to select
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.extrude(amount, opts)

Extrudes or retracts amount mm of filament on the currently selected extruder.

Example:

Extrude 5mm of filament on the current extruder, then retract 2mm.

OctoPrint.printer.extrude(5.0)
    .done(function(response) {
        OctoPrint.printer.extrude(-2.0);
    });

See the extrude command in Issue a tool command for more details.

Arguments

amount (float()) – The amount of filament to extrude/retract.
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setFlowrate(factor, opts)

Sets the current flowrate multiplier.

factor is expected to be a integer value >0 representing the new flowrate percentage.

See the flowrate command in Issue a tool command for more details.

Arguments

factor (integer()) – The flowrate as percentage
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.getBedState(data, opts)

Retrieves the current printer bed state/temperature information, and optionally also the temperature history.

The flags object can be used to specify the data to retrieve further via the following properties:

history: a boolean value to specify whether the temperature history should be included (true) or not (false), defaults to it not being included

limit: an integer value to specify how many history entries to include

See Retrieve the current bed state for more details.

Arguments

flags (object()) – Flags that further specify which data to retrieve, see above for details
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setBedTargetTemperature(target, opts)

Sets the given temperature on the printer’s heated bed (if available).

target is expected to be the target temperature as a float value.

Example:

Set the bed to 90°C.

OctoPrint.printer.setBedTargetTemperature(90.0);

See the target command in Issue a bed command for more details.

Arguments

target (float()) – The target to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setBedTemperatureOffset(offset, opts)

Sets the given temperature offset for the printer’s heated bed (if available).

offset is expected to be the temperature offset to set.

Example:

Set the offset for the bed to -5°C.

OctoPrint.printer.setBedTemperatureOffset(-5);

See the offset command in Issue a bed command for more details.

Arguments

offsets (object()) – The offsets to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.getChamberState(data, opts)

Retrieves the current printer chamber state/temperature information, and optionally also the temperature history.

The flags object can be used to specify the data to retrieve further via the following properties:

history: a boolean value to specify whether the temperature history should be included (true) or not (false), defaults to it not being included

limit: an integer value to specify how many history entries to include

See Retrieve the current bed state for more details.

Arguments

flags (object()) – Flags that further specify which data to retrieve, see above for details
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setChamberTargetTemperature(target, opts)

Sets the given temperature on the printer’s heated chamber (if available).

target is expected to be the target temperature as a float value.

Example:

Set the chamber to 50°C.

OctoPrint.printer.setChamberTargetTemperature(50.0);

See the target command in Issue a chamber command for more details.

Arguments

target (float()) – The target to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setChamberTemperatureOffset(offset, opts)

Sets the given temperature offset for the printer’s heated chamber (if available).

offset is expected to be the temperature offset to set.

Example:

Set the offset for the chamber to -5°C.

OctoPrint.printer.setChamberTemperatureOffset(-5);

See the offset command in Issue a chamber command for more details.

Arguments

offsets (object()) – The offsets to set
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.jog(amounts, opts)

Jogs the specified axes by the specified amounts.

amounts is expected to be an object with properties reflecting the axes to be jogged by the specified amount given as value.

Example:

Jog X by 10mm.

OctoPrint.printer.jog({"x", 10.0});

Jog Y by -5mm and Z by 0.2mm.

OctoPrint.printer.jog({"y": -5.0, "z": 0.2});

See the jog command in Issue a print head command for more details.

Arguments

amounts (object()) – Key-value-pairs of axes to jog and amount to jog it.
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.home(axes, opts)

Homes the specified axes.

axes is expected to be an array of strings specifying the axes to home.

Example:

Home the X and Y axis.

OctoPrint.printer.home(["x", "y"]);

Home the Z axis.

OctoPrint.printer.home(["z"]);

See the home command in Issue a print head command for more details.

Arguments

axes (array()) – List of axes to home
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.setFeedrate(factor, opts)

Sets the feedrate multiplier to use.

factor is expected to be a integer value >0 representing the new feedrate percentage.

See the feedrate command in Issue a print head command for more details.

Arguments

factor (integer()) – The feedrate multiplier as percentage
opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.getSdState(opts)

Retrieves the current ready state of the printer’s SD card.

See Retrieve the current SD state for more details.

Arguments

opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.initSd(opts)

Instructs the printer to initialize its SD card (if present).

See the init command in Issue an SD command for more details.

Arguments

opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.refreshSd(opts)

Instructs the printer to refresh the list of files on the SD card (if present).

See the refresh command in Issue an SD command for more details.

Arguments

opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer.releaseSd(opts)

Instructs the printer to release its SD card (if present).

See the release command in Issue an SD command for more details.

Arguments

opts (object()) – Additional options for the request

Returns Promise

A jQuery Promise for the request’s response

OctoPrintClient.printer

`OctoPrintClient.printer`